What Is The Difference Between 304 & 316l Stainless Steel?

High Purity Sanitary Process Applications

The key distinction between the 304 and the 316L is the addition of molybdenum within the 316L. It is the molybdenum that enhances corrosion resistance in environments wealthy in salt air and chloride – giving 316L the moniker of “marine grade” stainless steel.

The most typical and costly grade of metal is Type 304, which contains roughly 18 percent chromium and 8 % nickel. But the most well-liked and most cost-effective grade of metal is Type 430, which incorporates 17 percent chromium and zero.12 percent carbon. It’s the chromium that provides stainless steel its corrosion-resistant properties. That’s why the Type 304 chrome steel gasoline grills are more sturdy and can face up to heat higher than the Type 430.

  • Additional alloys usually embody nickel, titanium, aluminum, copper, nitrogen, phosphorous, selenium and molybdenum.
  • The two grades of stainless-steel most referenced in relation to outdoor environments are 304 and 316L, also referred to as marine-grade chrome steel.
  • Unlike the active metals mentioned above, stainless-steel is known as passive because it incorporates different metals including chromium.
  • Their numbers are decided by their alloy composition.

The resulting iron oxide floor layer is porous and fragile. In addition, as iron oxide occupies a larger volume than the original metal, this layer expands and tends to flake and fall away, exposing the underlying steel to further attack.

The most typical excessive-temperature gaseous combination is air, of which oxygen is probably the most reactive element. To keep away from corrosion in air, carbon metal is proscribed to approximately 480 °C (900 °F). Oxidation resistance in stainless steels increases with additions of chromium, silicon, and aluminium. Small additions of cerium and yttrium improve the adhesion of the oxide layer on the floor.

They possess an austenitic microstructure, which is a face-centered cubic crystal construction. Thus, austenitic stainless steels usually are not hardenable by warmth treatment since they possess the same microstructure at all temperatures. Grade 316 has especially higher resistance to salt and chloride pitting. Pitting corrosion can happen when stainless steel alloys, similar to grade 304 stainless-steel, come into contact with salt-wealthy sea breezes and seawater.

316l stainless steel vs 304

The addition of molybdenum provides pitting resistance in phosphoric acid, acetic acid and dilute chloride options and provides corrosion resistance in sulfurous acid. In addition,AISI 304 has a 18% Cr and 8% Ni and subsequently generally known as 18-eight chrome steel, while AISI 316 has a 16% Chromium and 10% Nickel. The most basic distinction between grade 304 and grade 316 stainless steels is that 316 tends to have more nickel and a little bit of molybdenum in the combine.