EN 10025-6 S550QL 1.8926 high strength steel pdf

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤

Most spring metal specifications are held to British Standard steel specs along with BS1449 & BS970.S620QL1 Steel – Special SteelCarbon steel strip and spring steel sheet is out there largely within the hardened and tempered condition, though sure sizes are available throughout the annealed scenario. Most spring metallic specs are held to British Standard steel specs including BS1449 & BS970.

wheel steel EN10025-6 S550Q 1.8924 steel plate

321 steel EN10025-6 S550Q 1.8924 steel plate

steel supplier EN10025-6 S550Q 1.8924 steel plate

We current our buyers with the simplest value merchandise in an effort to grow their popularity inside their trade. S355J2WP steel is a scorching rolled structural steel with anti-corrosion characteristic, additionally known as weathering steel and ambiance corrosion resistance metal, under standard EN . ASTM A283 plate steel options low and intermediate tensile strength carbon metal plate of structural quality.

www steeledrivers com EN10025-6 S550Q 1.8924 steel plate

Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment – LevittownNow.com

Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment.

Posted: Mon, 30 Nov 2020 17:33:56 GMT [source]

JW steel provide shipbuilding metal plate,HP bulb flat steel,alloy steel,pressure vessel steel,corten A/B,High vitality metal,widespread carbon metal,HSLA metal,pipe-making metal,stainless-steel and so on.High Strength Stainless Steel Plate S690Q, S690QL, Popular Products of High Strength Stainless Steel Plate S690Q, S690QL, S960QL, A514 Grade F by Stainless Steel Plate – TOBO STEEL GROUP CHINA from China. Source high quality alloy structual metal from our great choice of dependable alloy structual metal manufacturing factories. If specified on the time of order the metallic making course of shall be reported to the purchaser.The low temperature impacting take a look at for high energy steel plate S620QL1 must be achieved at minus 60 centigrade. If you want extra yield vitality, you can choose our others grade in S690Q, S890Q or S960Q Gangsteel promote S620Q S620QL and S6200QL1EN metal plates immediately from our mill.

When the temperature is not decrease than -50℃, the required minimum value of influence power is represented by L. If you’ve some other requirement for steel plate, please feel free to contact us. Domestic professional A516, 4140, 4130 metal supply firm, welcome you to purchase. It can be seen that, by rising the vitality of the filler metallic from G46 to G69, the load bearing functionality will increase just about in the identical means, impartial of the base metallic vitality. The producer reserves the right to change the chemical composition.

Contact Us
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

Information about metal pipe and becoming codes, industrial standards of pipe fittings, pipe changing into standards, ASTM requirements, DIN standards, JIS & GB requirements. We are devoted to ship a complete resolution of metallic pipes, fittings, flanges logistics and technical companies to meet our shopper’s necessities in primarily probably the most surroundings pleasant and worth efficient method. Then QL implies that the influence temperature of the metal plate is -50°C. We can provide the steel grades described as coil, slitted coil, sheets and cutted items.

Gangsteel cooperated with HBIS Wuyang mill to export excessive yield energy metal plate and Gangsteel have a lot production experience in high energy metal grade. Steel grades for EN S460Q,S460QL,S460QL1,S500 Q,S500 QL,S500 QL1,S690Q,S690QL,S690QL1.Plate tickness mm Plate width max 3300mm depending on steel grade and thickness Plate length max.18,700 mm (relying on steel grade and thickness; lengths up to 24,000 mm on request)Some results are eliminated in response to a notice of local legislation requirement.For extra information,please see here.Previous123456NextEN Grade S460Q quenched and tempered (+QT) -S460Q is a tempered and weldable fine grained steel.yield level EN S460Q plategt;460 N/mm EN S460Q plate#178; application welded metal constructions of various types,e.g.bridges and cargo-carrying constructions in addition to transport autos,lifting and earthmoving machines.application limits at -20 EN S460Q plate#176;C is warranted a notch impact power of 30 J cold formability for nominal size sixteen mm bending Some results are removed in response to a discover of native regulation requirement.For extra information,please see right here. The normal specifies 7 metal grades, and they have completely different yield strengths underneath ambient temperature situations. offers structural steel plate that meets the European standard for structural metal. We are engaged in producing and selling stainless-steel, put on resistant steel plate, weathering metal plate, excessive strength carbon steel plate, alloy steel, boiler and Pressure vessel steel plate, we aslo produce steel pipes, coils and so on.

  • EN metal grade specification is a high yield energy structural steels inside the quenched and tempered scenario steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metallic plate grade.WELDING.
  • Technical delivery conditions for flat products of extreme yield energy structural steels inside the quenched and tempered state of affairs.EN Standard main metal grade S460Q, S460QL1, S460QL, S500QL, S500Q, S500QL1, S550Q, S550QL, S690Q, S690QL, S890Q, S890QL, S960QL and so forth.
  • Quality Stainless Steel Plate producers & exporter – buy High Strength Stainless Steel Plate S690Q, S690QL, S960QL, A514 Grade F from China producer.EN metallic coil – S460QL,S460QL,S460QL1,S500QSell EN metal coil – S460QL,S460QL,S460QL1,S500Q,S500QL,S500QL1,S550Q,S550QL,S550QL1,S620QL,S690QL1,S890Q and S960Q with chemical and mechanical properties s620ql1 s550q s550ql s550ql1 s500qs460q s460ql s460ql1 en10025 metal plateEN is Standard specifies Hot rolled merchandise of structural steels.

EN S500Q is either out there as exstock or directly shipped from the mill to our customers across the globe.EN is a Plates have good forming and welding properties.S500Q,S500QL,S500QL1 Plates have higher payload capacity and are vitality efficient,hence12345Nexten s500ql1 steel grade – Mild Carbon Steel PlatesEN S500QL1 plate,S500QL1 High Strength Steel en s500ql1 metal grade.S500QL1- according to EN with minimal impression values all the way down to -60 EN S500QL1 high quality#176;C (-76 EN S500QL1 high quality#176;F) Unitedsteel Mill Supply High power steel plate,and have varied inventory measurement,when you require high power metal plate,please contact us by way of Email to contact us. Cross reference for International standards French German afnor DIN werkst s460ql1 material equal standards#246;ff British standars American % requirements Symbols requirements New Old standards Carbon , M07 En 1 A ,00/0,15 XC18 C15 1, M ,12/0,18 XC25 C22Cast Steel Equivalent Standards and GradesThe equal requirements and grades for Non-alloy structural steels,Case Hardening Steel,Stainless Steel,and Carbon Steel by Dandong Foundry in China.CROSS REFERENCE OF ASTM MATERIALCROSS REFERENCE OF ASTM MATERIAL SPECIFICATIONS COVERING CAST AND EQUIVALENT FORGED VALVES Important Note Data provided on this chart is for information purposes solely.Always seek the advice of current ASME or API official publications to verify information and cross reference knowledge. EN S550QL S550 QL STEEL PLATE.BBNSTEEL Grade EN S550QL.Specification THK three to 300,Width 1500 to 4050,Length 3000 to 27000.Standard Technical supply situations for flat merchandise of excessive yield energy.structural steels in the quenched and tempered condition.Approval By Third Party.EN S500QL1 plate,S500QL1 High Strength Steel S500QL – in accordance with EN with minimum impression values down to -40 EN S550QL metal in France#176;C (-40 EN S550QL steel in France#176;F) S500QL1- in accordance with EN with minimal influence values down to -60 EN S550QL metal in France#176;C (-76 EN S550QL steel in France#176;F) Unitedsteel Mill Supply High energy metal plate,and have various inventory size,if you require excessive power metal plate,please contact us through Email to contact us.EN Steel Plate – BBNSTEELBBNSTEEL exported EN .2 Certificate of ABS,DNV,LR,BV Class Approval material EN S890QL1,S890QL1 steel plate .


What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis







What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions


EN10025-6 S550QL Mechanical Properties



Yield Strength

Tensile Strength


Charpy V Notch Impact Test


Min Value



Min Mpa


Min %
















Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition


The Element Max (%)






























If you want to get the High power steel worth, please don’t hesitate to contact us. Any want in High strength Chemical Composition and Mechanical Properties, please be at liberty to contact us by e-mail or calling to us.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.