EN 10025-6 S550QL 1.8926 high strength steel young’s modulus

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.

It’s attention to detail like this, you could sense within the build high quality of your Hyundai. This website uses the most recent know-how and unfortunately you’re using a browser that’s not supported. Please download one of many following browsers to experience the web site fully. The refreshed 2020 Kia Sportage made its debut on the 2018 Chicago Auto Show.

  • When Cold Rolled, the properties are developed on Continuous Annealing strains the place there’s even larger control over thermal remedy.
  • The new Sonata provides lowered weight and improved gasoline efficiency while also reaching stronger durability with the brand new platform.
  • Dual-part steels may be produced as both sizzling rolled and cold rolled based material.
  • Hyundai Motor introduced that it has applied its third-era vehicle platform to the brand new generation 2020 Sonata.
  • When Hot Rolled, the rolling temperature and cooling course of on the Hot Strip Mill is rigorously managed to produce the ferrite-martensite structure from austenite.
  • The company continues to take advantage of the energy and lightweighting advantages of superior excessive strength steels in its new fashions.

The precise breakdown of the Elantra’s steel content material wasn’t instantly clear, nor had been the places of the harder, lighter stuff. Typically, one can find it in places just like the A-pillar, B-pillar, roof rail and sill. In order to provide a quote we need the element materials specifications, weight, packaging, ship to location, supply timing, and any other requirements. Complex Phase steel is being produced as both hot-rolled and cold-rolled which may be scorching dipped galvanized for corrosion protection. Hot-rolled products can be found within the larger thickness ranges wanted to provide structural kind components.

EN 10025-6 S550QL 1.8926 high strength steel band saw

Kenwal Steel Names Stephen Eisenberg Chairman And CEO – PRNewswire

Kenwal Steel Names Stephen Eisenberg Chairman And CEO.

Posted: Mon, 30 Nov 2020 13:00:00 GMT [source]

EN 10025-6 S550QL 1.8926 high strength steel hss

Take, for example, an incident that occurred within the Korean metropolis of Busan back in April 2012. Whilst crossing a bridge, a flatbed lorry carrying a 4-ton transport container tipped over sideways and fell onto a Hyundai Accent that was within the lane subsequent to it.

EN 10025-6 S550QL 1.8926  advanced high strength steel hyundai

We actually have a wind tunnel test facility that’s the biggest of its kind in Asia. It pits our automobiles in opposition to 200km/h winds created by large eight.4m propellers, and may create all kinds of punishing extremes of climate.

What does high tensile steel mean?

high-tensile steel in British English
(ˈhaɪˈtɛnsaɪl stiːl) low-alloy steel which can withstand great strain without breaking or becoming deformed, having a yield strength range of 50,000 to 100,000 pounds per square inch. Collins English Dictionary.

As nicely, Nano steels are being categorized as third Gen. But it’s beneath dialogue in the business, as you can imagine. Targets had been established in the Institute for Computational and Mathematical Engineering project. A presentation given on the Steel Market Development Institute’s 2017 Great Designs in Steel summarizes this project. Our colleagues on the Steel Market Development Institute and Auto/Steel Partnership also are engaged on growing common nomenclature for steels.

s550ql

What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions

 

EN10025-6 S550QL Mechanical Properties

Grade

Thickness

Yield Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S550QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

550

640-820

16%

30

50<t≤100

530

640-820

30

100<t≤150

490

590-770

30

Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S550QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

The all-new mannequin combines Hyundai’s slicing-edge type with a zero-emission powertrain. The innovative nature of the car has been recognized with quite a few awards including Car of the Year within the Next Green Car Awards. Hyundai can produce the metal itself, which might explain the large quantity in the present car.

Can boron steel be repaired?

Some Challenges of Boron
Once bent, it can’t be straightened. It requires replacement if damaged.

EN 10025-6 S550QL 1.8926 high strength carbon steel plate

Today, it’s nearer to round 1,500 megapascals – the type of power that might permit you to hang four soccer group buses on an inch-extensive strip with out it breaking in two. Since the terminology used to classify metal merchandise varies considerably all through the world, this doc uses the WorldAutoSteel format to define the steels.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

EN 10025-6 S550QL 1.8926 high strength steel nuts

Of course, the metal used again then is very different to the metal found in today’s models. Over the a long time, scientists and manufacturers have found the way to alter steel’s microstructure to make it stronger and autos ever safer. Indeed, regardless of the huge advances in digital driver aids the automotive trade has seen, one of many biggest enhancements in safety has come from metal. CP steels have a higher minimal yield energy in comparison with twin part steels of similar tensile strengths of 800 Mpa and larger. When in comparison with DP steels, CP steels have a much higher yield energy to tensile energy ratio. What’s the material that’s on the forefront of innovation within the automobile business?

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.

Uncategorized