EN 10025-6 S550QL 1.8926 high strength steel description

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.

Anything with less than an eight% alloying element is labelled as low alloy, anything over 8% is high alloy. Low alloy steels are by far the most common. Alloy steels are damaged down into two groupslow alloy steels and excessive alloy steels. Most commonly, the phrase “alloy metal” refers to “low alloy” steels. Steels could be categorized by a wide range of completely different techniques depending onThe composition, such as carbon, low alloy or stainless steel. The manufacturing strategies, such as open hearth, primary oxygen process, or electrical furnace strategies.

  • gangsteelNEWQ February 10, 2019 February 10, We devote ourself to supply more cheaper worth and extra higher service at China steel market.
  • S890Q EN S460QL quenched and tempered metal plate EN S460QL quenched and tempered metal plate could be used in Mechanical Engineeringsuspension arm and others components in machine.
  • Our inventory warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy steel plates.EN S890Q quenched and tempered steel plate Sell steel grade S890Q steel plate, S890QL steel plate, S890QL1 steel plate.
  • EN S550QL1 quenched and tempered steel plate Supplier.
  • EN metal grade specification is a excessive yield energy structural steels in the quenched and tempered situation steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL en s550ql metal gradeen s500ql1 steel distributor – Carbon steels – Low en s550ql metal gradeEN S690QL1 S690 QL1 STEEL PLATE__Steel Supplier.
  • EN steel grade specification is a excessive yield energy structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960 Strenx Extra High Strength Cold .

S550QL1 steel sheet Specs also could be called as alloy structural metal. Alloy steel means this type of grade accommodates some particular alloy composition. Alloy steel plate software may be very broad, as Machine, strain vessel, building and so on .

EN 10025-6 S550QL 1.8926  advanced high strength steel used for

EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada

EN10025-6 S550QL 1.8926 steel strip

Japan urges South Korea to end tariffs on steel bars after WTO ruling – Kyodo News Plus

Japan urges South Korea to end tariffs on steel bars after WTO ruling.

Posted: Tue, 01 Dec 2020 04:11:11 GMT [source]

EN 10025-6 S550QL 1.8926 2020 volvo high strength steel

EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada

EN 10025-6 S550QL 1.8926 high tensile strength steel rod

Our stock warehouse had about 30000tons S355J2, S355JR, S355K2, S355K4Low alloy metal plates.EN S890Q quenched and tempered steel plate Sell metal grade S890Q metal plate, S890QL steel plate, S890QL1 steel plate. S890Q EN S460QL quenched and tempered steel plate EN S460QL quenched and tempered metal plate could possibly be used in Mechanical Engineeringsuspension arm and others components in machine. EN S550QL1 quenched and tempered metal plate Supplier. gangsteelNEWQ February 10, 2019 February 10, We dedicate ourself to offer more cheaper price and extra higher service at China steel market. EN steel grade specification is a high yield power structural steels within the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL en s550ql steel gradeen s500ql1 steel distributor – Carbon steels – Low en s550ql metal gradeEN S690QL1 S690 QL1 STEEL PLATE__Steel Supplier.

s550ql

What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions

 

EN10025-6 S550QL Mechanical Properties

Grade

Thickness

Yield Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S550QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

550

640-820

16%

30

50<t≤100

530

640-820

30

100<t≤150

490

590-770

30

Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S550QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

We usually find that metal plate to EN S890QL known as different things by different engineers. Dillimax 890T is a excessive power quenched and tempered steel with a nice grain construction. Gangsteel Focus on Steel Material in China metal market and we commit ourself to deduct our buyer purchase value. Our primary ProductsShipbuilding metal plate, Low high strength metal plate, Stainless stee plates, Alloy round bar, Pressure vessel steel plate, Bulb flat metal, Hollow part, round bar and angle steel. SM490YA,JIS G3106 SM490YA, SM490YA Steel Plate, SM490YA steel manufacturing unit SM490YA, JIS G3106 SM490YA, SM490YA Steel Plate, SM490YA metal factory . Unitedsteel Carbon Plate Factory are specialized in producing and exporting Low alloy and high energy steel plate, heavy plate and extensive, heavy plate, Which is a big steel plate supplier mill at Unitedsteel Group. SM400B, JIS G3106 SM400B, SM400B Steel Plate, SM400B metal manufacturing unit Unitedsteel Carbon Plate Factory are specialised in producing and exporting Low alloy and high strength steel plate, heavy plate and broad, heavy plate, Which is a large steel plate supplier mill at Unitedsteel Group.

Gangsteel is specialized in super thick low alloy, high energy steel plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the tremendous thickness plate to 300mm now. S355J2WP metal is a hot rolled structural metal with anti-corrosion characteristic, also known as weathering metal and atmosphere corrosion resistance metal, under normal EN . ASTM A283 plate steel features low and intermediate tensile energy carbon steel plate of structural quality. S550Q/QL/QL1 metal plate could be used in Mechanical Engineering,suspension arm and others elements in machine.BBNSTEEL provide S550Q S550QL and S550QL1 EN steel plates immediately from our mill.in addition to that,we even have many inventory in hand in giant thickness.BBNSTEEL sincerely hope new and old customers may inquiry our metal plates. Alloy particular metal with specified minimum values of impression vitality at temperatures not lower than -forty °C Chemical composition of metal S550QL (1.8926), Standards of metal S550QL (1.8926) Mechanical Properties of metal S550QL (1.8926) Equivalent grades of metal S550QL (1.8926)S550QL / 1.

EN steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960 Strenx Extra High Strength Cold . Read MoreWelcome to buy s550ql1 metal specs,carbon steel plate en s550ql metal gradeEN metal grade specification is a high yield energy structural steels in the quenched and tempered condition steel plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

SteelNumber – Chemical composition Alloy particular steel with specified minimal values of influence energy at temperatures not decrease than -40 °C Chemical composition of steel S550QL (1.8926), Standards of steel S550QL (1.8926) Mechanical Properties of steel S550QL (1.8926) Equivalent grades of metal S550QL (1.8926)S890QL Steel Brown McFarlaneS890 steel is used in functions such as cranes , aerial platforms, load handling gear, bridges, and particular containers. We find that the class of steel plate that EN S890QL falls into is known as various things by completely different engineers. Buying or promoting minerals has never been simpler! If you’re about to import S690ql, you can examine the S690ql and producers with reasonable value listed above.

EN Hot rolled products of structural steels. Technical delivery situations for flat merchandise of high yield energy structural steels within the quenched and tempered conditionEN Plates and extensive flats manufactured from excessive yield strength structural steels within the quenched and tempered or precipitation hardened situations. we promise we can give you the certified en s550ql1 property at the aggressive price and rapid delivery time.We can produce as our buyer’s requirement.We keep many en s550ql1 property inventory in our warehouse, So hereby, we sincerely hope you be part of us, let’s be part of arms to make you be the No.1 in your local steel market. Carbon and low alloy metal also known as Mild steel.

EN 10025-6 S550QL 1.8926 high strength steel wire rope

Kenwal Steel Names Stephen Eisenberg Chairman And CEO – PRNewswire

Kenwal Steel Names Stephen Eisenberg Chairman And CEO.

Posted: Mon, 30 Nov 2020 13:00:00 GMT [source]

steels with a low carbon content and without alloy are softer and more simply formed, it’s a low cost material that is easy to shape. While not as onerous as greater carbon steels, carburizing can increase its floor hardness. carbon structural metal has the right tensile strength, good toughness, plasticity, processing property. S550QL steel material can be produced as S550QL1 metal plate, S550QL1 metal sheet, S550QL1 steel bar, S550QL1 part metal,S550QL1structural shapes. JW steel keeps greater than 10,000 tons scorching rolled and cold rolled S550QL1 steel in stock every month. We can meet our clients any amount request.E Worldwide equal gradesS550QL (1.8926) , E European and wordwide Steel equivalent grades These comparison desk is just supposed as an indication of the closest khown equivalent grades. The source standarts should all the time be checked for the precise purpose for each material, in case of doubtEN S550QL,EN S550QL metal – JOIN WIN S550QL metal material may be produced as S550QL steel plate, S550QL steel sheet,S550QL metal bar, S550QL part metal, S550QLstructural shapes.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.