EN 10025-6 S550QL 1.8926 high strength steel vs aluminum

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.

Typical evaluation and chemical composition acc. to EN ISO A and AWS A5.23BA-S3NiMo1,5 – Bavaria Welding – subarcfluxFine grain steels acc. to EN 10025, EN P460N S460NL to S550QL quenched and tempered steels NAXTRA 70, 20MnMoNi5-5, HY80 appropriate fluxes BF 5.1, BF 6.5 and BF 10. to ISO 3183, EN and API-5 L485Q X70 to L555Q X80 appropriate fluxes BF 6.30 and BF 6.5. Flux type suitability is strongly dependent on its software. In case of modification of the inspection costs shown above, the fees legitimate on the date of supply will apply.

EN 10025-6 S550QL 1.8926 very high strength steel

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

EN 10025-6 S550QL 1.8926 high strength steel manufacturers

Comparing with the metal grades S690QL and S690QL1,S690Q has a extra leisure restricted on the chemical parts P and S.Maximum P% is 0.025,Maximum S% is 0.015.For other main alloy parts they are the identical limited.S690QL plates have greater payload capability and are power environment friendly, therefore can be utilized in leaner buildings.en s690ql1 steel chemical composition – Hot Rolled EN S690Q quenched and tempered steel plate, BS . Comparing with the metal grades S690QL and S690QL1,S690Q has a extra leisure limited on the chemical elements P and S.Maximum P% is 0.025,Maximum S% is 0.015.For different major alloy elements they are the same limited.S690QL plates have higher payload capacity and are vitality efficient, therefore can be utilized in leaner buildings. EN metal grade specification is a high yield power structural steels within the quenched and tempered situation steel plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

The costs listed above encompass a base charge of EUR 5 per ton, as well as an additional charge of EUR 4 per ton for every additional metal grade for testing by lot or melt, and EUR 8 per ton for testing by plate. In general, the quality upcharge of the highest steel grade is applied, plus charges the place applicable for further prices. q245r asme equivalent materials Has been committed to the of export metal business more than 10 years. One of our benefit service is products rich. Our service includes all types of steel product , including raw supplies and processed completed products. A42CP European and wordwide Steel equivalent grades These comparison desk is just intended as an indication of the closest khown equivalent grades.

US Steel closes on $63.4M in green bonds for Fairfield project – Birmingham – Birmingham Business Journal

US Steel closes on $63.4M in green bonds for Fairfield project – Birmingham.

Posted: Mon, 30 Nov 2020 17:07:00 GMT [source]

EN 10025-6 S550QL 1.8926 high strength lightweight steel

Modifications of our price record for heavy plates Dear Sirs and Madames, Please note that the following adjustments in our heavy plate value listing will come into effect on January 1st 2016. Alibaba.com provides forty one 1.8931 steel products. 09CuPCrNi-A is a climate resistant steel created by alloying copper, chromium and nickel.

EN 10025-6 S550QL 1.8926 high strength steel fasteners

  • Call us on + at present for any query.s550ql1 metal plate exporter – Steel manufacturing facility – Carbon s550ql metal plate manufactureEN metal grade specification is a high yield power structural steels within the quenched and tempered situation steel plate grade in S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL metal plate grade.
  • High Strength Low Alloy or steel plate, is stronger and more durable than carbon steel, and is ductile, highly formable and weldable.
  • S550QL (1.8926) ,S550T – European and wordwide Steel equivalent grades These comparison table is only intended as an indication of the closest khown equivalent grades.The source standarts should at all times be checked for the specific objective for every materialSome outcomes are eliminated in response to a discover of native legislation requirement.For more info,please see right here.Sell S500QL,S500QL1,S460Q,S460QL,S460QL1,,metal plate EN metal grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL,S500QL1,S460Q,S460QL,S460QL1,S620QL1,S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade.
  • With both highly expert know-how and 47 years of expertise, JFS Steel all the time makes sure to meet each buyer’s demands.

Fabrication of EN S690QL Steel Plate. High power quenched and tempered steel plate could be easily welded and fabricated but its excessive yield energy and tensile strength in contrast with mild metal implies that it ought to be treated with some warning. We have offered info which is intended as a fundamental guide to varied fabrication strategies. S550QL – in accordance with EN with minimum impression values all the way down to -40°C (-40°F) S550QL1- based on EN with minimum impact values down to -60°C (-seventy six°F) Unitedsteel Mill Supply High power metal plate, and have varied inventory measurement, If you require high strength steel plate. Henan HZZ presents a large selection of high quality EN S620QL1 carbon and low-alloy high-power steel plate with N.

How Bethlehem Steel – Chrysler Building myth grew – The Morning Call

How Bethlehem Steel – Chrysler Building myth grew.

Posted: Mon, 30 Nov 2020 12:32:37 GMT [source]

If we now have agreed to choose-up being made by the recipient’s own autos , we calculate a buyer-pick-up surcharge in the amount of EUR 5 per ton for the additional inside costs incurred by us. For the definition of the place of shipment see paragraph 6 below. The regulation of the Federal Republic of Germany is solely applicable for all lawsuits between the Buyer and us. The turnover tax rules of the 6 EC Directive within the version in force at the time are valid for invoicing deliveries from one EU member state to another, until, in accordance with the 6th EC Directive, nationwide legislation prescribes a special regulation. Insofar as we’re to cost turnover tax, the purchaser shall pay the respective turnover tax along with the agreed purchase value. Where customary, we shall ship the merchandise packed and protected towards rust; costs shall be charged to the Buyer.

EN 10025-6 S550QL 1.8926  high strength galvanized steel

Characteristics and typical fields of software Wire Flux mixture for joint welding of excessive power and low temperature steels. The flux reacts metallurgical Mn-impartial. The sub-arc wire flux combination produces very good low temperature influence properties right down to forty °C.Si Union S 3 NiMo 1 – UV 420 TTR – ExocorCharacteristics and typical fields of application Union S 3 NiMo 1 – UV 420 TTR is a wire flux mixture for submerged arc welding of unalloyed and low alloyed metal grades. UV 420 TTR is an agglomerated fluoride-fundamental flux with high basicity with a neutral metallurgical behavior and is characterised by a excessive degree of purity.Structural steel and common function metal buy from s550ql applicationStandards and regulations for structural and general-purpose plates encompass metal compositions, mechanical properties and different quality parameters of the product meant for this software. S620QL1,S550Q ,S550QL ,S550QL1,S500Q ,metal plate ,EN .EN metal grade specification is a high yield energy structural steels in the quenched and tempered condition steel plate grade in S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL metal plate grade.S620QL1,S550Q ,S550QL ,S550QL1,S500Q ,metal plate S620QL1,S550Q ,S550QL ,S550QL1,S500Q ,steel plate ,EN .EN metal grade specification is a high yield strength structural steels in the quenched and tempered condition metal plate grade in S550Q,S550QL,S550QL1,S500Q,S890QL1,S960Q,S960QL,S620Q,S620QL,S690Q,S690QL,S690QL1,S890Q and S890QL steel plate grade.

s550ql

What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions

 

EN10025-6 S550QL Mechanical Properties

Grade

Thickness

Yield Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S550QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

550

640-820

16%

30

50<t≤100

530

640-820

30

100<t≤150

490

590-770

30

Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S550QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

EN 10027-1 S550QL 1.8926 high strength steel plate
EN 10027-1 S550QL 1.8926 high strength steel chart
EN 10027-1 S550QL 1.8926 high strength steel sheet
EN 10027-1 S550QL 1.8926 high strength steel for sale
EN 10027-1 S550QL 1.8926 high strength low alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel sheet metal
EN 10027-1 S550QL 1.8926 high strength carbon steel plate
EN 10027-1 S550QL 1.8926 plate slenderness limits for high strength steel sections
EN 10027-1 S550QL 1.8926 what is high strength steel plate
EN 10027-1 S550QL 1.8926 a high strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plate
EN 10027-1 S550QL 1.8926 high tensile strength steel plates
EN 10027-1 S550QL 1.8926 high strength stainless steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate australia
EN 10027-1 S550QL 1.8926 high strength weldable steel plate
EN 10027-1 S550QL 1.8926 ultra high strength steel plate
EN 10027-1 S550QL 1.8926 high yield strength steel plate
EN 10027-1 S550QL 1.8926 high strength alloy steel plate
EN 10027-1 S550QL 1.8926 high strength steel plate canada

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.