EN 10025-6 S550QL 1.8926 zinc plating high strength steel

Gangsteel supply EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate: Quenching and tempering (Q+T) S550QL is a European standard special alloy structural steel, attributed to quenched and tempered high yield strength structural steel, S indicates structural steel, 550 is the yield value, unit MPa, Q indicates delivery
Conditions, L indicates that the temperature is not lower than -50��, the specified smaller value of impact energy, S550QL steel is a trademark in the EN 10025-6 specification, this specification rules that the smaller nominal thickness of the steel is 3mm, and the larger nominal thickness ≤
150mm.

S355 structural grade carries minimal yield energy of 355 N/mm²m, the JR designation confirms that the hyperlink for you steel has undergone longitudinal Chary V-Notch impression testing at 27J at room temperature. Recently there has been elevated funding and research for the event of the “3rd Generation” of AHSS.

EN 10025-6 S550QL 1.8926 high strength steel specific energy

The picture S is for structural metallic, 960 for the minimal yield power in thickness beneath 50mm . The suitability of en structural steel pipe consists of functions similar to bolted connections, welding, as well as riveting. Since non-alloy S235JR is easily weldable and bendable, the material works out to be nicely suited to use in non-crucial constructions. The machinability traits of the EN Steel Pipe materials is corresponding to that of mild steel grades.

  • DILLIMAX 690 is a extreme energy quenched and tempered, fine grained structural metal with a minimum yield energy of 690 MPa 2 in its supply condition .
  • Gangsteel Company sells S960QL steel plate sickly in accordance with EN Standard for our prospects EN S690Q steel plate provider.
  • To stop chilly cracking in the welded joints only welding consumables giving welds of very low hydrogen content material ought for use.a283 grade c metallic sheet for railway utility gradeS620QL steel coils dealerBebon Steel excessive metal ASME, ASTM SA573 Grade fifty eight metallic coil software.
  • On this net page you possibly can see informations about materials known as S620QL (DIN/EN), or to assist us customise our website online and software for you so as to enhance your experience.ThyssenKrupp Steel AG – HIGH STRENGTHS620QL S690QL 1.8926 1.8927 1.8928 Quenched and application of appropriate welding consumables and the choice of acceptable welding circumstances.

Its main enterprise covers the manufacturing of metal merchandise, deep processing of steel products, customization of steel structure, and export of products. In order to supply a quote we want the detail materials specifications, weight, packaging, ship to location, supply timing, and another requirements. Beyond the automotive trade, the following industries also stand to benefit with the event of superior high-power steels. The microstructure of TRIP steels consists of no less than five-volume percent of retained austenite, which is embedded in a main ferrite matrix. The microstructure also contains exhausting phases like bainite and martensite in varying quantities. Automotive parts that at present use DP steels together with but not limited to Crossmembers, Pillars, Roof Rails, Frame Extensions, Shock Towers, Crush Cans and Wheels. The primary types of materials being utilized are Dual Phase, Complex Phase/Multi Phase, Trip, Martensite and Press Hardenable Steel.

s550ql

What is different in EN10025-6 S550Q S550QL and S550QL1?

S550Q, S550QL, S550QL1 are European standard quenched and tempered high-strength structural steel plates.
S550Q, S550QL, S550QL1 organize production and implement European standard EN10025-6.
S550Q, S550QL, and S550QL1 conform to EN10029 standard for appearance quality deviation.
The main difference between S500, QS550QL and S550QL1 is low temperature impact toughness: Q means -20℃ impact; QL means -40℃ impact; QL1 means -50℃.

What is EN10025-6 S550QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

What is EN 10025-6 QT steel plate referring standard?
EN 1011-2 Welding-Recommendations for welding of metallic materials-Part 2: Recommendations for arc welding of ferritic steels
EN 10020: 2000 definition and classification of steel grades
EN 10025-1: 2004 Hot-rolled structural steel products-Part 1: General technical delivery conditions
EN 10027-1 Steel naming system-Part 1: Steel names and symbols
EN 10027-2 Steel naming system-Part 2: Steel number
EN 10163-1 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 1: General requirements.
EN 10163-2 Delivery requirements for surface conditions of hot-rolled steel plates, wide flat products and sections-Part 2: Plates and wide flat products
EN 10164 Steel products with through-thickness performance-Technical delivery conditions

 

EN10025-6 S550QL Mechanical Properties

Grade

Thickness

Yield Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S550QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

550

640-820

16%

30

50<t≤100

530

640-820

30

100<t≤150

490

590-770

30

Note: Impact energy for impact test is on longitudinal

EN10025-6 S550QL Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S550QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

Steels provided to this commonplace are appropriate for hardening and in the quenched and tempered situation have good toughness at a given tensile power. S355J2WP metal is a scorching rolled structural metal with anti-corrosion function, additionally referred to as weathering metal and environment corrosion resistance metal, underneath normal EN .

EN 10025-6 S550QL 1.8926  high strength steel for automotive applications

This specific steel grade ic categorised in Part 2 of the Euronorm specification EN 10025. The letter capital S within the term EN S235JR Pipe signifies a structural steel that exhibits a minimum yield strength properties of around 235 MPa. On the opposite hand, the letters with a designation JR confirms that the availability has been administered a Charpy V-notch impact check. At room temperature, the value of the impact tests of the EN S235J2 Material stands at 27 joules.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: whatsapp: 0086-13598879167

Gangsteel produce EN10025-6 s550ql and EN10027-1 s550ql and EN10027-2 1.8926 steel plate. thickness 3mm to 180mm.Heat treatment of S550QL steel plate
, ,

EN 10025-6 S550QL 1.8926 high strength low alloy steel uses

offers information about composition, processing and microstructure of the steel. Steel for the automotive trade can be classified as conventional mild steel, typical high power steel and advanced high power steel . In the last 20 years, the metal business has developed totally different alloying and processing combinations to provide steel microstructures providing greater power for reduced steel section measurement and weight .

High energy weathering metal has been utilized in bridge engineering.It may also be used within the flooring board,containers, power plant chimneys, railway engineering and different outside metal, corresponding to massive outdoor sculpture metal. DINESH METAL INDUSTRIES is a proactive organisation engaged in supplying of high quality products that meet and exceed clients’ particular necessities and thus guarantee full satisfaction. There are many good paperwork offered to the worldwide and residential patrons once they purchase the plates. The major objective of supplying it’s assuring the shoppers is that they are geared up high quality of plates solely. The paperwork like enterprise invoice, fumigation certification, heat therapy chart, prime quality assurance plan, raw material check report, lab check report, materials traceability report and so on. The mill examine certifications as per EN 10204/three.1B is provided to the shoppers. Depending on the thickness of the product and the manufacturing circumstances, the manufacturer could add to the metal one or a number of alloying components as much as the utmost values given to be able to get hold of the desired properties.

EN 10025-6 S550QL 1.8926 que significa high strength steel

Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment – LevittownNow.com

Falls Twp. Holding Special Meeting On Proposed US Steel Site Redevelopment.

Posted: Mon, 30 Nov 2020 17:33:56 GMT [source]

A number of current research, compared and predicted the consumption of AHSS in automotive, building and other purposes . Not surprisingly, the demand for AHSS will enhance in the coming years, with the automotive business being the principle driver. This first generation has more formability than HSLA at the similar power degree. This is due to its multiphase microstructure, which incorporates ferritic and martensitic phases for a balance between formability and energy.

Gangsteel trade item:
1.Payment Item: T/T,L/C
2.Trade Terms:CIF,FOB,CFR,CNF
3.Delivery Time: 10-30days
4. Steel Services: Cutting, Painting, shot blasting, Pretreatment, and The Third Party Inspection in DNV,BV, LR, GL, ABS, CCS , CE Mark, TUV, ISO, and others in super thick steel plate.
5.Packaging Details: Standard export seaworthy packing or as required.
6.Loading Port:Shanghai ,Tianjin, Qingdao.
7.Offer Ability:5000MT/Per Month.
8.MOQ:1 Pcs.