EN10025-6 S500Q 1.8924 zinc plated carbon steel

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

ASTM’s steel standards are instrumental in classifying, evaluating, and specifying the fabric, chemical, mechanical, and metallurgical properties of the different types of steels, that are primarily used in the production of mechanical elements, industrial elements, and building elements, in addition to different equipment related to them. EN steel grade specification is a excessive yield energy structural steels in the quenched and tempered situation steel plate grade in S460Q, S460QL, S460QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S690Q, S690QL, S690QL1, S890Q, S890QL1 and S890QL metal plate grade. Steel Plate EN Grade S460Q S460QL1 S460QL S500QL S500Q S550Q EN S550QL1 EN S690Q EN S890Q in Large Stock. Mechanical and chemical properties of EN S460Q Chemical composition % MAX C Si Mn P S B Cr Cu Mo Nb Ni Ti 0.22Steel Plate,HRC,CRC steel supplierWe maintain more than 100,000 tons metal in stock each month, this is adequate to meet the shoppers’ ex-inventory requirement .At the identical time, this massive stock amount can even meet our course of requirement .

S500Q steel plate

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition


C %

Si %

Mn %

P %

S %

N %

B %

Cr %











Cu %

Mo %

Nb %

Ni %

Ti %

V %

Zr %












What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties



Min Yield (Mpa)

Tensile (MPa)

Elongation (%)

Min Impact Energy




Min 500Mpa




Min 27J



Min 480Mpa




Min 27J



Min 440Mpa




Min 27J


1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

SVENSK STANDARD SS-EN Fastställd Utgåva Sida Ingår i Svenska Elektriska Kommissionen, SEK (1+9) SEK Område 31 Copyright SEK. Reproduction in any kind without permission is prohibited. 09CuPCrNi-A is a weather resistant metal created by alloying copper, chromium and nickel. The paperwork like QAP, heat therapy chart, packaging list, fumigation certification, MTC as per EN 10204/three.1b, EN10204/3.2 third get together check report are provided. double rising older, n–employment of two totally completely different getting older remedies, in sequence, to regulate the kind of precipitate shaped from a supersaturated alloy matrix to be able to pay money for the desired properties. killed steel, n–a metallic deoxidized to such a stage that primarily no response occurred between carbon and oxygen throughout solidification. laser beam welding, n–a welding course of that makes use of a laser beam as the heat provide. Throughout the system, the final two digits give the carbon content materials in hundredths of a %.

EN 10025-6 S500Q carbon steel plate grades chart pdf

U.S. Steel to Buy Remaining Stake in New, Low-Cost Steel Mill – The Wall Street Journal

U.S. Steel to Buy Remaining Stake in New, Low-Cost Steel Mill.View Full Coverage on Google News

Posted: Tue, 08 Dec 2020 15:22:00 GMT [source]

A special thanks to Christine Doyle who entered knowledge nearly endlessly into the late hours of the night time for the second edition , and to Debbie Knackwho kept the workplace operating easily in the course of the production of this handbook. A special thanks is prolonged to IHS Engineering Products for use of their Engineering Resource Center . One individual couldn’t have produced this handbook and the accompanying e-e-book. These acknowledgments can’t adequately specific the authors honest appreciation and gratitude for everyones assistance. We can provide chilly rolled metal sheet and chilly rolled metal plate in the size and gauge you need, together with customized reduce-to-size pieces. rimmed steel, n–a metallic that contained sufficient oxygen to generate carbon monoxide on the boundary between the strong metallic and the remaining molten metallic during solidification, resulting in an outer layer low in carbon. semikilled steel, n–an incompletely deoxidized metal that contained enough oxygen to kind adequate entrapped carbon monoxide all through solidification to offset solidification shrinkage.

  • Comparing metal standards isn’t an exact science, so the biggest challenge of preparing such a book was deciding on the “guidelines of comparability.” Of the similar books in the marketplace right now, none explain intimately why one steel is comparable to another.
  • There were many metal requirements from around the world that were new to me, which created far too many surprises and delays in completing this guide.
  • The metal plates no doubt is manufactured by using wonderful quality of raw materials sourced from respected market distributors.
  • As a metallurgical engineer and very long time user of metal standards, creator of the four CASTI Metals Data Books, and member of ASTM A01 and B02 standard committees, I knew all too well the various pitfalls and challenges of writing such a handbook.
  • EN metallic grade specification is a excessive yield energy structural steels within the quenched and tempered condition metal plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.
  • If a purchaser wants further yielding power can undoubtedly store for S460Q grade product.

structural metal plates S960QL EN10025 metal is a building materials composed of chemical elements such as silicon, sulfur and phosphorus. structural steel plates S960QL EN10025 can be utilized F, b, z were expressed as boiling steel, semi-static metal, killed metal.

Gangsteel has a 11 years expertise in present prime quality, tremendous thick steel plate. Matter Index Index to Steel Info Pages Information On British Standard Steels BS EN 10025.

EN 10025-6 S500Q steel angle

EN10025-6 S500Q 1.8924 killed carbon steel plate grades

Resulfurized carbon steels are designated inside the sequence 11XX, resulfurized and rephosphorized carbon steels 12XX and steels having manganese contents between 0.9 and 1.5 %, nevertheless no other alloying parts are designated 15XX. Both of those two steels need to be carried out Quenching and Tempering heat remedy,and do the low temperature impacting check at minus forty centi diploma. S500MC is a high power scorching rolled structural steel primarily used for chilly fashioned components. API 5L X65 PSL1 Pipe is a high yield seamless pipe that is modified to swimsuit offshore structural functions. It is intended for use in fastened offshore buildings and is designed to function within the offshore sector. 16Mo3 Steel is a EN10028 specified strain vessel grade chrome molybdenum steel alloy is used as a weldable metal within the fabrication of commercial boilers and steel pressurised vessels discovered in the oil.

COVID-19 Impact Analysis and Business Plan for New Normal

s460q s460ql s460ql1 Under commonplace EN 10025_6 , extreme energy steel plate S460QL which is the same as Chinese steel grade Q460E. en s500ql1 steel grade Our Company can supply the S500Q, S500QL and S500QL1 metal plate instantly from our mill within the aggressive value for our prolonged cooperation.Structural Steel Chemical Composition, Mechanical en s500ql1 steel gradeStructural metal S500 is a excessive vitality, low alloy steel and falls contained in the European EN PT2 regular. Acknowledgements The creator gratefully acknowledges the help of Michael Ling, P.Eng.

Contact Us
Email: admin@gangsteel.com
Phone: We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts

, ,

EN 10025-6 S500Q carbon steel plate gauge chart

To say the least, these guidelines changed from chapter to chapter whereas the guide was being written. It wasn’t till the last chapter and appendix had been accomplished that I was capable of finalize the principles of comparison. In the tip, an entire evaluate of the e-book was performed resulting in the reorganization of some chapters and the fine-tuning of others. There had been too many occasions once I thought the book was completed, solely to have to change, add, or delete a rule which made yet one more evaluation of the e-book necessary. After greater than two years of researching metal standards and gathering knowledge from around the globe for the 2nd and third editions of this handbook, then growing a comparability order to greater than one hundred,000 pieces of knowledge, this handbook is an ongoing and expanding project. The addition of a completely searchable e-e-book on CD-ROM makes this product much more useful, since looking for one piece of data in additional than one hundred,000 is not a simple task.

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days