EN 10025-6 S500Q carbon steel plate chart

We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts which specification is a high yield strength structural steels in the quenched and tempered. The condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel grade.

EN10025-6 S500Q 1.8924 jual plat carbon steel

This is because of far much less metallic over all is required, welding costs is decreased and the prices for filler are also lowered. Additionally there are the charge savings to be made in operation because of lighter tools which means lots much less structural assist costs, vitality costs for movement or both. Gangsteel is specialised in producing and exporting carbon steel plates, stainless-steel plates and carbon metal profile chrome steel profile Material. S355 structural grade carries minimal yield power of 355 N/mm²m, the JR designation confirms that the link for you metallic has undergone longitudinal Chary V-Notch influence testing at 27J at room temperature. This flat metal ranks amongst scorching-rolled profiles (former “Dutch profile”) and reveals on one broadside a bulb over its full measurement. These are weld ready structural metal kinds for utility in stationary constructions in coastal areas based on BS 7191. Co’s S690QL Plates also present enhanced resistance to acidic components, and that’s why a lot of our purchasers most well-liked them for a wide array of capabilities.

  • The minimal value specified for influence power when the temperature simply isn’t decrease than -20°C .
  • When the temperature simply isn’t lower than -50℃, the specified minimum value of influence vitality is represented by L.
  • The minimal specified impression energy when the temperature just isn’t decrease than -60℃ is represented by L1.
  • Strenx® metallic has extraordinarily constant and assured bending properties for repeatable efficiency in the workshop.

Also, the product ranges supplied are manufactured in accordance with product high quality requirements and as per business setup norms. One of the benefits that S690QL has over extra typical steels is that while on a per ton foundation the plates are costlier the event costs may be considerably lowered.

1. There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
2. The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
3. The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010
4. The other ingredients are the same, as shown below:
C:≤0.20, Si:s0.80, Mn:s1.70, N:≤0.015, B:≤0.0050, Cr:s1 .50, Cu:0.50, Mo:0.70,
Nb: 0.06, Ni: s2.0, Ti: s0.05, V: ≤0.12, Zr: ≤0.15
3. Application and prospect of S500Q S500QL/S500QL1
S500Q applies construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms,
Excavator support arm, etc.
Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.
4. S500Q series steel plate low-alloy high-strength structural steel:
5, S500Q series steel plate series performance specifications: this trademark fulfills the EN 10025/6-2004 European standard specifications.
6. Packaging, marking and quality certificate of S500Q series steel plate: The packaging, marking and quality certificate of steel plate shall comply with the rules of GB/T 247

EN10025-6 S500Q 1.8924 meps asian carbon steel hot rolled plate index

EN10025-6 S500Q 1.8924 carbon steel plate where to buy

Strenx® metallic has extraordinarily consistent and guaranteed bending properties for repeatable effectivity within the workshop. The minimum specified impression energy when the temperature just isn’t lower than -60℃ is represented by L1. When the temperature simply isn’t lower than -50℃, the desired minimum value of affect vitality is represented by L. EN S460QL1 steel is European regular alloy specific metallic with specified minimal values of influence vitality at temperatures not lower than -60 ° C. The specified minimum yield energy of metal is 460MPa1) to 960 MPa1) If you could have any requirement, please contact gangsteel. The minimal worth specified for influence vitality when the temperature simply isn’t lower than -20°C .

Contact Us
S500Q STEEL PLATE SUPPLIER
Email: admin@gangsteel.com
Phone: We supply and export EN 10025-6 steel plate S500Q 1.8924. EN10025-6 S500Q and 1.8924 cutting parts

, ,

The high quality management staff is employed that are wanting at the top quality of the plates to ensure that high quality is maintained till EN S620QL Supplier plates attain to its customers. We are Manufacturer and Exporter of S690QL Structural Steel Plate, EN S690QL High Yield Steel Plates Suppliers in Mumbai, India.

U.S. Steel to Buy Remaining Stake in New, Low-Cost Steel Mill – The Wall Street Journal

U.S. Steel to Buy Remaining Stake in New, Low-Cost Steel Mill.View Full Coverage on Google News

Posted: Tue, 08 Dec 2020 15:22:00 GMT [source]

S690QL STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Steel Plates Due to the provides excessive power nature, using S690QL will promote leaner designed constructions with increased payload capability and vitality effectivity. Gangsteel present EN S690QL excessive power, excessive yield, structural alloy quenched and tempered metal plate. S550Q, S550QL, S550QL1 are European commonplace quenched and tempered high-power structural metal plates. S550Q, S550QL, and S550QL1 conform to EN10029 normal for look high quality deviation. They could possibly be merely moved from one place to a unique as they’re mild in weight and likewise durable. Impact-resisting functionality of these plates makes them acceptable for his or her capabilities in numerous industries.

S500Q steel plate

What is EN 10025-6 S500Q chemical?
EN10025-6 S500Q quenched and tempered steel plate Chemical composition

Grade

C %

Si %

Mn %

P %

S %

N %

B %

Cr %

  S500Q  

0.200

0.800

1.700

0.025

0.015

0.015

0.005

1.500

 

Cu %

Mo %

Nb %

Ni %

Ti %

V %

Zr %

 

 

0.500

0.700

0.060

2.000

0.050

0.120

0.150

 

 

What is EN 10025-6 S500Q Equal Grade.
S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is application of EN10025-6 S500Q?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

Grade

Thickness

Min Yield (Mpa)

Tensile (MPa)

Elongation (%)

Min Impact Energy

 

S500Q

8mm-50mm

Min 500Mpa

590-770Mpa

17%

-20

Min 27J

 

51mm-100mm

Min 480Mpa

590-770Mpa

17%

-20

Min 27J

 

101mm-150mm

Min 440Mpa

540-720Mpa

17%

-20

Min 27J

 

Description by Manufacturer
Sell: EN10025-6 S500Q, S500QL, S500QL1 Steel plate
1. Steel Grade :EN10025-6 S500Q, S500QL, S500QL1 S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.
2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm
3. Adopt Standard: EN 10025-6.
4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.
5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate
6. Payment Item: 30% TT, or LC and TT
7. Trade Terms: FOB, CFR, CIF
8. Delivery Time: 30-40days

Uncategorized