EN 10025-6 metal steel plate exporter

Gangsteel supply en10025-6 s620ql en 10025-6 s690ql high strength steel plate thickness 5mm to 200mm. We also provide the cutting service. If you require for S620QL steel plate, Please contact us to get quotation.
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

The supreme hardness of steel surfaces breaks rocks into small components shortly. They are tenacious and high yielding Structural Steel plates, manufactured in compliance with the worldwide standards. They present glorious forming and welding properties and is weldable utilizing EN10025-6 S620QL Supplier virtually all welding strategies. They could be easily moved from one place to a different as they’re gentle in weight and in addition sturdy.
S620QL STEEL PLATE

EN10025-6 Steel grades and varieties
The standard specifies 7 steel grades, and they have different yield strengths under ambient temperature conditions. When required, all supplied steel grades from the following varieties shall be specified.
The minimum value specified for impact energy when the temperature is not lower than -20°C (no mark). When the temperature is not lower than -50℃, the specified minimum value of impact energy is represented by L.
(Except for S960) The minimum specified impact energy when the temperature is not lower than -60℃ is represented by L1. In quenching and tempering delivery conditions (Q) and grade L: steel EN 10025-6-S460QL; or steel EN10025-6-1.8906.
Delivery conditions of S620Q, S620QL, S620QL1 steel plate
Quenching + tempering (Q).
Note: Quenching and then tempering directly after hot rolling is considered equivalent to conventional quenching and tempering
Impact performance of S620Q, S620QL, S620QL1 steel plate
S620Q is at -20°C; S620QL is at -50°C; S620QL1 is at -60°C.
What is en10025-6 s620ql property?

Mechanical Properties

Grade

Thickness

Yield
Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S620QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

620

700-890

15%

30

50<t≤100

580

700-890

30

100<t≤150

560

650-830

30

Note: Impact energy for impact test is on longitudinal

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4

What is EN10025-6 S620QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

Gangsteel production information:
1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

 

What is EN10025-6 S620QL steel sheet Chemical Composition?

Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S620QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14


All operations are carried out beneath the monitoring of well-qualified consultants. S690QL Steel Plate Supplier, S690QL, S690QL Plate Exporter, EN S690QL Plate, S690QL Steel Sheets, S690QL High Strength Structural Steel Plate, EN10025 Grade S690QL Steel Plates, S690QL High Yield Quenched and Tempered Steel Plate Manufacturer in India. S690QL Steel Plate is sleeved into plastic bag individually, pieces wrapped with water-proof material, bundled with nylon rope. Clear labels are tagged on the outside of the package deal for straightforward identification of the amount and product I.D. S690QL Steel Plate packing shall be according to international commonplace in bundles strapped by strips then into containers to keep away from any damage. The maximum allowable stress relieving temperature for S690QL is (560 C/1040 F) and chilly forming takes place beneath this temperature. In order to scale back issues during chilly forming of S690QL any flame cut or sheared edges in the bending space have to be ground earlier than cold forming.

S690QL COILS is an irregular of agency steels, which makes it much much less exhausting and improves its flexibility. S690QL Sheets as nicely has numerous different excellent features to offer like newest machinery and technology is utilized, directed by specialists, makes positive to offer full satisfaction, exact dimension, excessive sturdiness, corrosion resistant and so on. This S690QL PLATES is obtainable in particular sizes and shapes, that are being made up of qualitative alloy.

EN 10025-6 metal plates your exporter

Additionally there are the price financial savings to be made in operation because of lighter machinery that means much less structural assist costs, vitality prices for movement or every. Aakash Steel is a extremely acclaimed provider and manufacturer of S690QL Plate. Our supplied S690QL Steel Plate in customizable choices corresponding to size, form, and ending to meet client requirements. S690QL Steel Plates is a structural metal grade plate and is produced to give high yield strength during industrial functions. The thickness is for indication only but we will often have thicker plates obtainable in most grades. Hot forming of S690QL and different excessive yield steels is not really helpful as the new forming will remove the advantages of the mills tempering process. This signifies that the hot formed plate will then must be tempered again.

Quality Steel investing nearly $14 million, adding jobs at Fremont plant – The News-Messenger

Quality Steel investing nearly $14 million, adding jobs at Fremont plant.

Posted: Thu, 26 Nov 2020 10:56:22 GMT [source]

EN 10025-6 steel plate shop exporter

Hot forming of S690QL and other excessive yield steels simply isn’t helpful as the hot forming will take away the benefits of the mills tempering process. In Europe the structural metal specification EN includes a range of high power quenched and tempered metal grades and the designation S690QL presents the parameters for metal with a minimal yield energy of 690 MPa. S355 structural grade carries minimum yield power of 355 N/mm²m, the JR designation confirms that the link for you steel has undergone longitudinal Chary V-Notch impact testing at 27J at room temperature. ASTM A283 plate metal features low and intermediate tensile power carbon metal plate of structural high quality. These plates are usually used by crane manufacturers, in jackup rigs for the oil and gas business and in quite a lot of structures where high yield metal is required for extra power and/or to avoid wasting weight. • Agriculture industry utilises DIN TStE690V, RQT 70, etc. metal plates in machines like tractors, mix harvesters, disc harrows, sprayers, and so forth. to oppose friction and fissures caused because of constant contact with mud and stones.

  • It is ready to enhance the performance, sturdiness, and safety of automobiles, lifting gear, and metal constructions.
  • Steel with minimal yield energy of 690 MPa has proved extremely popular with metal customers because of its availability, value, and ease of fabrication.
  • Due to the steels excessive strength, constructions could be designed lighter, payloads elevated, and vitality used more effectively.

The remedy purifies the plate, resulting in a stiff but mild – weight metal plate, prepared for use in high-stress areas requiring low weighing materials for structural assist. In hazardous industries, such as offshore oil extraction and gas manufacturing vegetation, safety is of utmost significance. We contemplate it too, to provide S690QL1 structural metal plates like JFE 780LE, EN S690Q, EN S690QL, and so forth. that not only have high mechanical forte but also toughened plates via heat therapy that keep away from ruptures, thereby guaranteeing security onboard. This large inventory of Dillimax plates permits us to supply each a wide choice of particular person plates at a specific thickness and dimension – either a number of plates from the identical warmth – or the place you need very specific values. This can save appreciable time speaking to a number of inventory holders, every with 1 or 2 plates, making an attempt to satisfy a project requirement with plates from several mills. High strength quenched and tempered metal plate could be simply welded and fabricated.
EN 10025-6 steel plate products exporter
We can supply EN S460Q stress vessel steel plates in quite a lot of thickness and sizes at affordable prices. EN S460Q is either available as ex–inventory or instantly shipped from the mill to our prospects throughout the globe. In Europe the structural metal specification EN features a range of excessive power quenched and tempered steel grades and the designation S690QL offers the parameters for steel with a minimal yield strength of 690 MPa. Metline is a specialized supplier of EN S500QL metal sheets and plates. We can offer EN S500QL pressure vessel steel plates in a variety of thickness and sizes at cheap costs.

Submit Your Enquiries To Information@marcsteelindia Com

The steel specified in this standard can be used for the production of hot-rolled plates with steel grades S460, S500, S550, S620, S690, S890, and S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm. After quenching and tempering
The specified minimum yield strength of steel is 460MPa1) to 960 MPa1) If you have any requirement, please contact gangsteel.

Gangsteel had about stocklist 3000tons at S620Q, S620QL, S620QL1 steel plates, where S means structural steel, and Q means that the impact temperature of the steel plate is -20°C,Then QL means that the impact temperature of the steel plate is -50°C. Then guess what QL1 represents. QL1 means that the impact temperature of the steel plate is -60°C. 620 means that the thickness of the steel plate is £50mm. The minimum yield strength value is specified.

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: EN 10025-6 stainless steel plates sale exporter

, ,

Gangsteel produce high strength steel plate.S620 steel plate is a quenched and tempered high-strength steel plate. The series grades are S620Q, S620QL, and S620QL1. It is a low-carbon non-alloy structural steel plate of European standard EN10025-6.
Domestic Wuyang Iron and Steel Company can produce it.
In order to ensure its performance, this type of steel plate has a carbon content below 0.2%.

We additionally manufacture customized made S690QL Plates with varying thickness and easy edges. This S690QL PLATES is obtainable in definite configurations and dimensions, that are being made up of qualitative alloy. We are involved in the supplying of S690QL STEEL Coils, which have hovering resistance to corrosion and are obtainable in made-to-order specs. Co’s S690QL Plates moreover supply enhanced resistance to acidic components, and that’s the reason lots of our purchasers most popular them for a wide selection of purposes. Due to its excessive power, it permits design of lighter, further durable and efficient merchandise and constructions. The EN GRADE S690QL PLATES goes throgh Hydroforming is a course of that is analogous to deep drawing.