EN 10025-6 plate steel exporter

Gangsteel supply en10025-6 s620ql en 10025-6 s690ql high strength steel plate thickness 5mm to 200mm. We also provide the cutting service. If you require for S620QL steel plate, Please contact us to get quotation.
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

The suppliers are offering mill take a look at certificate to the consumers in accordance with EN 10204/3.1B. They too present other test certificates like a hundred% radiography check report, third-party take a look at report, raw material certificates, and consumers take a look at report. Before the packaging and shipping of the EN S690QL PLATES, it is properly tested for the assurance of high quality factor. The tests conducted are like positive materials identifications take a look at, flattening take a look at, flaring check, hardness take a look at, pitting resistance test, intergranular corrosion test, macro test, micro test, chemical check, mechanical check and so on. This plate at present is easily accepted by world buyers because of excellence in product fabrications. The trade as having good years of working experience is manufacturing the superb high quality of EN S690QL PLATES in complete ranges and is providing it at reasonable charges. The Strenx 1300 High Strength Steel are the plates with high toughness and good welding capability.

EN10025-6 Steel grades and varieties
The standard specifies 7 steel grades, and they have different yield strengths under ambient temperature conditions. When required, all supplied steel grades from the following varieties shall be specified.
The minimum value specified for impact energy when the temperature is not lower than -20°C (no mark). When the temperature is not lower than -50℃, the specified minimum value of impact energy is represented by L.
(Except for S960) The minimum specified impact energy when the temperature is not lower than -60℃ is represented by L1. In quenching and tempering delivery conditions (Q) and grade L: steel EN 10025-6-S460QL; or steel EN10025-6-1.8906.
Delivery conditions of S620Q, S620QL, S620QL1 steel plate
Quenching + tempering (Q).
Note: Quenching and then tempering directly after hot rolling is considered equivalent to conventional quenching and tempering
Impact performance of S620Q, S620QL, S620QL1 steel plate
S620Q is at -20°C; S620QL is at -50°C; S620QL1 is at -60°C.
What is en10025-6 s620ql property?

Mechanical Properties




Tensile Strength


Charpy V Notch Impact Test


Min Value



Min Mpa


Min %
















Note: Impact energy for impact test is on longitudinal

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4

What is EN10025-6 S620QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis







Gangsteel production information:
1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days


What is EN10025-6 S620QL steel sheet Chemical Composition?

Chemical Composition


The Element Max (%)






























We can provide EN S460QL pressure vessel steel plates in a variety of thickness and sizes at affordable prices. EN S460QL is either available as ex–stock or directly shipped from the mill to our prospects across the globe.

EN 10025-6 steel plate supplies exporter

Contact Us
Email: admin@gangsteel.com
Phone: EN 10025-6 stainless steel plates sale exporter

, ,

No doubt at present all across the globe triton alloys as gained larger recognition as they’re dealing fairly and providing wonderful quality of worth-added and sales after companies. They worldwide with the home and global buyers are dealing as a reliable and trustworthy manufacturer, provider, stockiest and exporter of the excellent high quality of EN S690QL PLATES. The plates that they are providing are in product high quality EN10025-6 S620QL Supplier standards and reliability phrases are internationally accredited for various purposes. The plates little question are excellent in quality that easily fulfills all buyers’ requirements with utmost satisfaction. We also Offering a wide range of heavy work 1300 MC Strenx structural steel plate for our clients. These strenx 1300 mc plate out there in reasonably priced price at Stancor Alloys Mumbai.

These s690ql steel plate are handed on using best grade cruel material open to ensure common high quality. These s690ql steel plate are open alive and properly dimension and thickness as appeared by the requirements of our buyer. Inferable from exceedingly experienced assembling of qualified succesful and utilization of newest progression plan, Vandan Steel & Engg. co. have given stunning s690ql steel plate and profiles to clients all through the around the globe. Conquest Steel and Alloys, the suppliers of Stainless Steel plates, provide a broad vary of S690QL1 Steel Plates, an established juggernaut in bearing acute loads and opposing abrasive erosion. With larger mechanical strength as by no means before, our structural steel plates, also referred to as EN S690Q, we develop steel plates with enhanced toughness and minimum impression. As the process of quenching and tempered has been improved and refined, carbon metal plates produced this fashion have become stronger and it’s not uncommon now to seek out plates with strengths of more that 1100 MPa which is four occasions stronger than basic structural steel.

Gangsteel had about stocklist 3000tons at S620Q, S620QL, S620QL1 steel plates, where S means structural steel, and Q means that the impact temperature of the steel plate is -20°C,Then QL means that the impact temperature of the steel plate is -50°C. Then guess what QL1 represents. QL1 means that the impact temperature of the steel plate is -60°C. 620 means that the thickness of the steel plate is £50mm. The minimum yield strength value is specified.

EN 10025-6 galvanized steel plate exporter

The steel specified in this standard can be used for the production of hot-rolled plates with steel grades S460, S500, S550, S620, S690, S890, and S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm. After quenching and tempering
The specified minimum yield strength of steel is 460MPa1) to 960 MPa1) If you have any requirement, please contact gangsteel.

  • The remedy purifies the plate, leading to a stiff yet light – weight steel plate, prepared for use in excessive-stress areas requiring low weighing supplies for structural support.
  • S690QL A excessive strength structural metal equipped in quenched and tempered situation.
  • We inventory an enormous quantity of our products at our storehouse in Mumbai, because the stockist, catering to every industry want with utmost precision and customization of plates.
  • The metal is designed to offer glorious welding and bending properties and it provides substantial prospects for financial savings in materials prices, processing and handing.

Co’s S690QL Plates also provide enhanced resistance to acidic components, and that is why lots of our shoppers preferred them for a wide array of functions. Their flawless ending and durable development attract shoppers towards them. S690QL STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Steel Plates Due to the supplies excessive strength nature, using S690QL will promote leaner designed structures with increased payload capability and power efficiency. The EN GRADE S690QL PLATES goes throgh Hydroforming is a course of that is analogous to deep drawing. adopted by Incremental sheet forming which is mainly sheet metallic working or sheet metallic forming course of.

The finest things are that they provide the plates to the consumers at reasonable rates with worth-added and gross sales after services. They at the time of plate’s fabrications are using the most recent know-how and modern tools for better fabrications. Also, the product ranges supplied are manufactured in accordance with product high quality standards and as per business setup norms. The material is heat treated using the spread and temper process and has magnificent bowing and welding properties.

Gangsteel produce high strength steel plate.S620 steel plate is a quenched and tempered high-strength steel plate. The series grades are S620Q, S620QL, and S620QL1. It is a low-carbon non-alloy structural steel plate of European standard EN10025-6.
Domestic Wuyang Iron and Steel Company can produce it.
In order to ensure its performance, this type of steel plate has a carbon content below 0.2%.

EN 10025-6 suppliers steel plate exporter
EN S690QL High Strength Steel Plates, S690QL Plates Suppliers, High Quality EN S690QL Plates, EN S690QL Hot Rolled Plates, Quenched And Tempered Structural Steel S690QL Steel Plates, DILLIMAX S690QL Plates, S690QL Plates Stockist in Mumbai, India. Co. is among the main manufacturer, supplier and stockiest of products corresponding to Stainless Steel, Aluminium Alloy, Copper Nickel Alloy, Carbon Steel, High Nickel Alloy, Alloy Steel and some of the specialized products. Co. is among the main manufacturer and supplier of S690QL, S690QL High Strength Quenched and Tempered Steel Plate, S690QL High Strength Low Alloy Steel Plate at the most effective value in India.
Catering the wants and requirements of the consumers, the plates are supplied to the patrons in customizes specs that vary in wall thickness and sizes. The dealers are good at providing the product exactly or the identical as per the drawings patrons provides to them.

Quality Steel investing nearly $14 million, adding jobs at Fremont plant – The News-Messenger

Quality Steel investing nearly $14 million, adding jobs at Fremont plant.

Posted: Thu, 26 Nov 2020 10:56:22 GMT [source]

EN GRADE S690QL PLATES is handed over ironing uniformly thins the workpiece in a particular space. the following Laser slicing CNC laser includes transferring a lens assembly carrying a beam of laser light over the surface of the steel. The next process of EN GRADE S690QL PLATES is Photochemical machining which is tightly managed corrosion course of.