EN 10025-6 steel plates supplies exporter

Gangsteel supply en10025-6 s620ql en 10025-6 s690ql high strength steel plate thickness 5mm to 200mm. We also provide the cutting service. If you require for S620QL steel plate, Please contact us to get quotation.
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

Gangsteel had about stocklist 3000tons at S620Q, S620QL, S620QL1 steel plates, where S means structural steel, and Q means that the impact temperature of the steel plate is -20°C,Then QL means that the impact temperature of the steel plate is -50°C. Then guess what QL1 represents. QL1 means that the impact temperature of the steel plate is -60°C. 620 means that the thickness of the steel plate is £50mm. The minimum yield strength value is specified.

The steel specified in this standard can be used for the production of hot-rolled plates with steel grades S460, S500, S550, S620, S690, S890, and S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm. After quenching and tempering
The specified minimum yield strength of steel is 460MPa1) to 960 MPa1) If you have any requirement, please contact gangsteel.

S690QL Steel Plate packing will be according to international commonplace in bundles strapped by strips then into containers to avoid any injury. The most allowable stress relieving temperature for S690QL is (560 C/1040 F) and chilly forming takes place under this temperature. In order to scale back issues throughout chilly forming of S690QL any flame minimize or sheared edges in the bending area have to be floor earlier than cold forming. Because chilly forming can enhance the hardness of the metal and cut back toughness the bending radius could typically have to be increased over the minimums proscribed in manufacturer recommendations.

New steel beams for Brent Spence Bridge fix delivered to Cincinnati – WLWT Cincinnati

New steel beams for Brent Spence Bridge fix delivered to Cincinnati.

Posted: Thu, 26 Nov 2020 14:27:00 GMT [source]

EN 10025-6 perforated steel plates exporter

Unfortunately the metal in this condition is also very brittle and it is not potential to use it in many functions. A method of warmth treatment for alleviating this downside known as tempering and requires the quenched metal to be re-heated though this time to beneath the decrease important temperature. The result’s to place toughness and ductility again in to the metal and, although some of the yield strength of the quenched metal is misplaced, the tip results of the quenching and tempering course of is to provide a powerful steel which can also be simple to weld, bend, and fabricate usually.

Manufacturing Process Of En 10025

These strategies allow us to complete all operations inside the desired time. S690QL Plates from our manufacturing unit have made their area in markets efficiently internationally. We additionally manufacture customized made S690QL Plates with varying thickness and smooth edges. S690QL Structural Steel Plate can be reduce and profiled to your precise specs as per requirement. S690QL Plates are undergone rigorous testing like chemical evaluation, flattening take a look at, hardness test, intergranular corrosion test, and so on. We are additionally the exporter of High Yield S690QL Structural metal Plate in Iran, Thailand, Kuwait, Oman, US, UK, Iraq, Turkey, UAE , Italy, Vietnam, Bhutan, Qatar.

EN10025-6 Steel grades and varieties
The standard specifies 7 steel grades, and they have different yield strengths under ambient temperature conditions. When required, all supplied steel grades from the following varieties shall be specified.
The minimum value specified for impact energy when the temperature is not lower than -20°C (no mark). When the temperature is not lower than -50℃, the specified minimum value of impact energy is represented by L.
(Except for S960) The minimum specified impact energy when the temperature is not lower than -60℃ is represented by L1. In quenching and tempering delivery conditions (Q) and grade L: steel EN 10025-6-S460QL; or steel EN10025-6-1.8906.
Delivery conditions of S620Q, S620QL, S620QL1 steel plate
Quenching + tempering (Q).
Note: Quenching and then tempering directly after hot rolling is considered equivalent to conventional quenching and tempering
Impact performance of S620Q, S620QL, S620QL1 steel plate
S620Q is at -20°C; S620QL is at -50°C; S620QL1 is at -60°C.
What is en10025-6 s620ql property?

Mechanical Properties




Tensile Strength


Charpy V Notch Impact Test


Min Value



Min Mpa


Min %
















Note: Impact energy for impact test is on longitudinal

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4

What is EN10025-6 S620QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis







Gangsteel production information:
1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days


What is EN10025-6 S620QL steel sheet Chemical Composition?

Chemical Composition


The Element Max (%)






























The thickness is for indication solely but we are going to often have thicker plates available in most grades. Metline is a specialized provider of EN S460QL1 steel sheets and plates. We can supply EN S460QL1 strain vessel steel plates in a wide range of thickness and sizes at affordable prices. EN S460QL1 is either available as ex–inventory or directly shipped from the mill to our customers across the globe. Metline is a specialized supplier of EN S500QL metal sheets and plates. We can provide EN S500QL stress vessel steel plates in a variety of thickness and sizes at cheap costs.

Steel players sent home, but optimistic season will resume – WQOW TV News 18

Steel players sent home, but optimistic season will resume.

Posted: Wed, 25 Nov 2020 23:03:45 GMT [source]

We are exporting Strenx 1300 MC Plate in Saudi Arabia, Usa, Germany, Chile, Egypt, Indonesia, Italy, Czech Republic, Bahrain, Oman, Paland, Qatar, Canada, Brazil, Uae, Uk, Singapore, and so on. The materials is warm treated utilizing the spread and temper course of and has magnificent bowing and welding properties. In perspective on the supplies firstclass nature, utilizing S690QL will drive much more slim combined structures with widened payload most remote level and centrality efficiency.and it’s made down in a strategy of programs, for instance, EN10025 S690QL,EN10025 S690 QL,EN S690QL,EN S690 QL.

Gangsteel produce high strength steel plate.S620 steel plate is a quenched and tempered high-strength steel plate. The series grades are S620Q, S620QL, and S620QL1. It is a low-carbon non-alloy structural steel plate of European standard EN10025-6.
Domestic Wuyang Iron and Steel Company can produce it.
In order to ensure its performance, this type of steel plate has a carbon content below 0.2%.

Contact Us
Email: admin@gangsteel.com
Phone: EN 10025-6 stainless steel plates sale exporter

, ,

Trade names or Trademarks have been used solely for reference purpose and to help clients establish merchandise according to listed specs. Standard EN is the Standard Specification Technical Delivery Conditions For Flat Products Of High Yield Strength Structural Steels In The Quenched And Tempered Condition.

  • Conquest Steel & Alloys is a good name within the subject of manufacturing high-quality products in different alloy varieties similar to plates.
  • We deliver merchandise in customizable options to meet buyer-specified necessities.
  • In addition to this, we are also one of the prominent suppliers, merchants, exporters and wholesalers of the product EN S690QL PLATES within the global properly as the domestic market right now and for a few years now.
  • All our merchandise are designed after following all the national and international standards to make sure the standard of the product.
  • This metal is utilized in other applications similar to heavy transportation, building trade, machine constructing, and lifting gear.

Their flawless finishing and sturdy construction entice clients in the direction of them. S690QL STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Steel Plates Due to the supplies high energy nature, using S690QL will promote leaner designed constructions with increased payload capability and energy effectivity.
EN 10025-6 thick steel plate exporter
We at champak metal manufacture, trade and supply EN Grade S690QL for our prospects. co. makes them thriving in s690ql metal plate .With in depth stretches of perceiving get together s690ql steel plate we provide sensational, hack down price at this level the best collusion collectively. As nuts and bolts be to that our affirmation account right now is in numerous nations like Saudi arabia, Kuwait, Qatar, Oman, Yemen, UAE, Iran, Turkey, Kazakhstan, Greece, Singapore, Thailand, Indonesia, Vietnam, South Africa,South America,Brazil, India, Australia, Egypt.We welcome your benefit. The s690ql steel plate gave by us are seen by purchasers in varied circles of the affiliations interfacing from elementary endeavors, for example EN10025-6 S620QL Supplier, Sugar, Paper, Textile, Dairy, Engineering to progressively unbelievable, for example, Oil and Gas, Petrochemical, Chemical and Fertilizers, Power Generation and Nuclear Industries. With years of expertise in manufacturing s690q steel plate we offer top quality, lower price however the best service. Comparing with the metal grades S690QL and S690QL1,S690Q has a more leisure limited on the chemical components P and S.Maximum P% is 0.025,Maximum S% is 0.015.For different major alloy elements they are the identical limited.S690QL plates have greater payload capability and are vitality environment friendly, hence can be utilized in leaner constructions.