EN 10025-6 steel plate heavy exporter

Gangsteel supply en10025-6 s620ql en 10025-6 s690ql high strength steel plate thickness 5mm to 200mm. We also provide the cutting service. If you require for S620QL steel plate, Please contact us to get quotation.
EN 10025-6 steel grade specification is a high yield strength structural steels in the quenched and tempered condition steel plate grade in S500QL, S500QL1, S460Q, S460QL, S460QL1, S620QL1, S550Q, S550QL, S550QL1, S500Q, S890QL1, S960Q, S960QL, S620Q, S620QL, S690Q, S690QL, S690QL1, S890Q and S890QL steel plate grade.

Their flawless finishing and durable building appeal to purchasers towards them. S690QL STEEL PLATE GRADE AND SPECIFICATIONEN S690QL Steel Plates Due to the supplies high strength nature, using S690QL will promote leaner designed buildings with elevated payload capability and energy efficiency. S890QL Structural Steel Plate may be minimize and profiled to your exact specs as per requirement.
S620QL STEEL PLATE

EN10025-6 Steel grades and varieties
The standard specifies 7 steel grades, and they have different yield strengths under ambient temperature conditions. When required, all supplied steel grades from the following varieties shall be specified.
The minimum value specified for impact energy when the temperature is not lower than -20°C (no mark). When the temperature is not lower than -50℃, the specified minimum value of impact energy is represented by L.
(Except for S960) The minimum specified impact energy when the temperature is not lower than -60℃ is represented by L1. In quenching and tempering delivery conditions (Q) and grade L: steel EN 10025-6-S460QL; or steel EN10025-6-1.8906.
Delivery conditions of S620Q, S620QL, S620QL1 steel plate
Quenching + tempering (Q).
Note: Quenching and then tempering directly after hot rolling is considered equivalent to conventional quenching and tempering
Impact performance of S620Q, S620QL, S620QL1 steel plate
S620Q is at -20°C; S620QL is at -50°C; S620QL1 is at -60°C.
What is en10025-6 s620ql property?

Mechanical Properties

Grade

Thickness

Yield
Strength

Tensile Strength

Elongation

Charpy V Notch Impact Test

Degree

Min Value

S620QL

mm

Min Mpa

Mpa

Min %

-40℃

J

5≤t≤50

620

700-890

15%

30

50<t≤100

580

700-890

30

100<t≤150

560

650-830

30

Note: Impact energy for impact test is on longitudinal

Description by Manufacturer
Sell: S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1, Steel plate, EN 10025-4

What is EN10025-6 S620QL Carbon Equivalent: CEV?

Thickness, mm

Max CEV based on the ladle analysis

5≤t≤50

0.65%

50<t≤100

0.77%

100<t≤150

0.83%

Gangsteel production information:
1. Steel Grade : S690Q, S690QL, S690QL1, S890Q, S890QL, S890QL1, S960Q, S960QL, S620Q, S620QL, S620QL1, S550Q, S550QL, S550QL1, S500Q, S500QL, S500QL1, S460Q, S460QL, S460QL1.

2. Dimension(T*W*L) : Thickness: 6mm to 300mm ; Width: 1500mm to 4020mm ; Length: 4000mm to 18000mm

3. Adopt Standard: EN 10025-6.

4. Heat Treatment:
Hot Rolled, CR, Normalized, Quenched, Tempering, TMCP, Electroslag Remelting Technical.

5. Steel Services: Cutting, Painting, Ball blast, Pretreatment and the Third party in section in DNV, BV, LR, GL, ABS and CCS in super thick ship steel plate

6. Payment Item: 30% TT, or LC and TT

7. Trade Terms: FOB, CFR, CIF

8. Delivery Time: 30-40days

 

What is EN10025-6 S620QL steel sheet Chemical Composition?

Chemical Composition

Grade

The Element Max (%)

C

Si

Mn

P

S

N

B

S620QL

0.22

0.86

1.80

0.025

0.012

0.016

0.006

Cr

Cu

Mo

Nb

Ni

Ti

V

1.60

0.55

0.74

0.07

2.1

0.07

0.14

EN 10025-6 steel base plate exporter

Unfortunately the steel on this condition can also be very brittle and it’s not potential to use it in lots of functions. A method of heat remedy for alleviating this downside known as tempering and requires the quenched metal to be re-heated although this time to beneath the lower crucial temperature. The result’s to put toughness and ductility again in to the metal and, though a number of the yield power of the quenched steel is lost, the end result of the quenching and tempering process is to produce a strong steel which can be easy to weld, bend, and fabricate usually.
EN 10025-6 used steel plate exporter
S890QL Plates are undergone rigorous testing like chemical analysis, flattening test, hardness test, intergranular corrosion check, etc. We are also the exporter of High Yield S890QL Structural metal Plate in Iran, Thailand, Kuwait, Oman, US, UK, Iraq, Turkey, UAE , Italy, Vietnam, Bhutan, Qatar. S690QL Structural Steel Plate can be cut and profiled to your precise specs as per requirement. S690QL Plates are undergone rigorous testing like chemical analysis, flattening take a look at, hardness test, intergranular corrosion test, and so forth. We are also the exporter of High Yield S690QL Structural metal Plate in Iran, Thailand, Kuwait, Oman, US, UK, Iraq, Turkey, UAE , Italy, Vietnam, Bhutan, Qatar. EN S690QL Plate may be warmth handled utilizing quench and temper methods. These EN Grade S690QL Plates have good welding and forming properties.

EN 10025-6 stainless steel perforated plates exporter

Contact Us
HENAN GANG IRON AND STEEL CO.,LTD
Email: admin@gangsteel.com
Phone: EN 10025-6 stainless steel plates sale exporter

, ,

The steel specified in this standard can be used for the production of hot-rolled plates with steel grades S460, S500, S550, S620, S690, S890, and S960 series steel plates with a minimum nominal thickness of 3mm and a maximum nominal thickness of ≤150mm. After quenching and tempering
The specified minimum yield strength of steel is 460MPa1) to 960 MPa1) If you have any requirement, please contact gangsteel.

We are engaged in delivering S890QL En Plate in customizable choices to fulfill customer-specified requirements. S355J2WP metal is a scorching rolled structural metal with anti-corrosion feature EN10025-6 S620QL Supplier, additionally known as weathering metal and ambiance corrosion resistance steel, underneath normal EN .

Gangsteel produce high strength steel plate.S620 steel plate is a quenched and tempered high-strength steel plate. The series grades are S620Q, S620QL, and S620QL1. It is a low-carbon non-alloy structural steel plate of European standard EN10025-6.
Domestic Wuyang Iron and Steel Company can produce it.
In order to ensure its performance, this type of steel plate has a carbon content below 0.2%.

EN S460QL is both obtainable as ex–stock or instantly shipped from the mill to our customers across the globe. Metline is a specialised provider of EN S500QL metal sheets and plates.

S690QL is the best structural metal for bigger trailers.S690QL STEEL PLATE GRADE AND SPECIFICATION EN S690QL Steel Plates Due to the materials high energy nature,using S690QL will promote leaner designed structures with increased payload capacity and energy efficiency.We can provide S690QL Steel Plates Thickness from 4mm to 150mmSome results are eliminated in response to a discover of local legislation requirement.For more information,please see here. S355 structural grade carries minimal yield strength of 355 N/mm²m, the JR designation confirms that the hyperlink for you metal has undergone longitudinal Chary V-Notch influence testing at 27J at room temperature. They are tenacious and excessive yielding Structural Steel plates, manufactured in compliance with the international requirements. They present wonderful forming and welding properties and is weldable using virtually all welding strategies. They can be easily moved from one place to a different as they’re light in weight and likewise sturdy.

Gangsteel had about stocklist 3000tons at S620Q, S620QL, S620QL1 steel plates, where S means structural steel, and Q means that the impact temperature of the steel plate is -20°C,Then QL means that the impact temperature of the steel plate is -50°C. Then guess what QL1 represents. QL1 means that the impact temperature of the steel plate is -60°C. 620 means that the thickness of the steel plate is £50mm. The minimum yield strength value is specified.

We create S690QL1 structural steel plates not solely in Stainless Steel but also with additives like Nickel, Alloy and Manganese to increase overall utility of the plates. One of the advantages that S690QL has over extra conventional steels is that while on a per ton basis the plates are dearer the development prices may be significantly decreased. This is as a result of far less steel over all is required, welding costs is decreased and the costs for filler are additionally reduced. Additionally there are the fee savings to be made in operation due to lighter equipment which means less structural help costs, vitality prices for motion or each. Product Description High yield strength metal plate S500QL under EN owned the minimum yield power at 500 Mpa and tensile energy inside Mpa.The essential technical requirement when rolling metal plate S500QL accommodates quenching and tempering heat remedy,low temperature impacting check under minus 40 centigrade.The further technical has Ultrasonic examination. Gangsteel is specialized in super thick low alloy, high strength metal plate and cooperated with ABS, BV, DNV, CCS, GL, LR, KR, NK, and RINA Classification Society to approve the tremendous thickness plate to 300mm now.

  • Our S690QL1 structural metal plates are fantastic grained, for max performance in precarious working conditions.
  • Our S690Ql is a structural metal grade and is produced to give high yield energy during usage.
  • This steel is used in different purposes similar to heavy transportation, construction industry, machine constructing, and lifting equipment.

Our widest inventory of S690QL Hot-Rolled Heavy plates enable us for prompt supply to Middle east, Gulf countries, far east asian international locations in any emergency, we will provide High S690 QL EN 10025–6 Quenched structural steel Plate at supplier price which proves us that we’re probably the greatest stockist of High yield EN10025 Grade S690 QL Plates in India. we began stocking S690 QL EN 10025–6 tempered structural steel Plate of different producers of Stainless Steel Plates in Japan & Europe like Kobelco, Sandvik, Sanyo Special Steels & Wuxi, in 12 months 1995, We turned largest Stockist of S690QL Plates in India, at present we’ve ready inventory of S690 QL EN 10025–6 structural metal Plates at our stockyard in Mumbai, Maharashtra. We are the one Supplier in india who maintains EN Steel plate in all Sizes. Aakash Steel is a extremely acclaimed supplier and manufacturer of S690QL Plate. Our provided S690QL Steel Plate in customizable choices similar to measurement, shape, and finishing to fulfill client requirements. S690QL Steel Plates is a structural steel grade plate and is produced to give excessive yield strength throughout industrial purposes. We at Stancor Alloys Inc export and provide of S1100QL Structural Plate and S1100QL Steel Sheet is a Structural Steel S690QL grade.

Quality Steel investing nearly $14 million, adding jobs at Fremont plant – The News-Messenger

Quality Steel investing nearly $14 million, adding jobs at Fremont plant.

Posted: Thu, 26 Nov 2020 10:56:22 GMT [source]

EN GRADE S690QL PLATES is first Bended, EN GRADE S690QL PLATES then goes through the process referred to as curling to get the form a edge on a hoop. then EN GRADE S690QL PLATES is move through the method called Decambering in order that it removes the camber. then EN GRADE S690QL PLATES is stretched over a type of die this process is called Deep drawing. then EN GRADE S690QL PLATES is cut into slits in alternating sample. The subsequent process is Hemming and seaming during which EN GRADE S690QL PLATES two sheets of metallic is folded to type a joint. If you’ve any inquiry in metal price or technical circumstances, please contact us freely. Our supplied S690QL Quenched and Tempered Plate with their high formability traits can be bent, welded and minimize into numerous configurations and dimensions.