en10025-6 S500QL 1.8909 steelersdepot

Gangsteel supply high-strength structural steel plates en10025-6 S500QL,1.8909 steel plates in quenched and tempered heat treatment. S500QL usually called high-strength plates and en10025-6 S500QL are widely used in construction machinery and mining machinery. S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered.

The entire processing and software techniques are of basic significance to the reliability of products created from this steel. The person should make sure that his design, building and processing methods are aligned with the fabric, correspond to the state-of-the-art that the fabricator has to adjust to and are appropriate fort he intended use. The customer is answerable for the number of the fabric. Tensile and impression checks shall be performed according to EN once per heat and forty t. Tests on every warmth handled plate could also be attainable on request. One particular person value could also be below the minimal common value specified, provided that it is not less than 70 % of that worth.

en10025-6 S500QL 1.8909 guitar steel

en10025-6 S500QL 1.8909 steel suppliers near me
en10025-6 S500QL 1.8909 tube steel
en10025-6 S500QL 1.8909 metal steel
en10025-6 S500QL 1.8909 steel supplier
en10025-6 S500QL 1.8909 steel company
en10025-6 S500QL 1.8909 mild steel
en10025-6 S500QL 1.8909 steel sales
en10025-6 S500QL 1.8909 united states steel
en10025-6 S500QL 1.8909 tubular steel
en10025-6 S500QL 1.8909 free steel
en10025-6 S500QL 1.8909 steel supplies
en10025-6 S500QL 1.8909 steel manufacturers
en10025-6 S500QL 1.8909 honing steel
en10025-6 S500QL 1.8909 metalsdepot
en10025-6 S500QL 1.8909 steels
en10025-6 S500QL 1.8909 ussteel
en10025-6 S500QL 1.8909 steel shop
en10025-6 S500QL 1.8909 steel tube sizes
en10025-6 S500QL 1.8909 steel products
en10025-6 S500QL 1.8909 steel material
en10025-6 S500QL 1.8909 steelrs
en10025-6 S500QL 1.8909 steel tubes
en10025-6 S500QL 1.8909 steelers wheel

en10025-6 S500QL 1.8909 brushed steel

See where EN Grade S500QL quenched and tempered (+QT) falls on the fabric property chart for Density in opposition to Elastic modulus in your materials selection and design course of. Our Ashby charts are interactive with extra technical knowledge upon clicking. If you could have any need in S500Q/QL/QL1 steel plates,please be happy to contact us by e-mail or cell. We connect engineers, product designers and procurement teams with the most effective supplies and suppliers for his or her job. List your company on Matmatch now and reach engineers around the world looking for such supplies. It could be machined in the annealed condition, nevertheless condition H1150M will yield finest results.

S500QL

What is EN 10025-6 S500QL Equal Grade.

Equivalent steel grade of S500QL CHINA Grade Q500E

Europe

Germany

France

Sweden

FeE 500 V KT

TStE 500 V

E 500T

2615

S500Q and S500QL steel plates are German standard high-strength structural steels, usually called high-strength plates, equivalent to the national standard Q500D,
It is widely used in construction machinery and mining machinery.
S500QL steel standard: EN 10025/6-2004 delivery status: quenched and tempered. S500Q series are: S500Q, S500QL, S500QL1.Second, S500Q chemical composition: The quality of S500Q is divided into three levels

What is EN 10025-6 S500Q mechanical properties?
EN10025-6 S500Q quenched and tempered steel plate mechanical properties

Grade

Thickness

Min Yield (Mpa)

Tensile (MPa)

Elongation (%)

Min Impact Energy

 

EN10025-6 S500QL

 

8mm-50mm

Min 500Mpa

590-770Mpa

17%

-40

Min 30J

51mm-100mm

Min 480Mpa

590-770Mpa

17%

-40

Min 30J

101mm-150mm

Min 440Mpa

540-720Mpa

17%

-40

Min 30J

 

What is application of EN10025-6 S500QL?
Used in buildings, bridges, ships, vehicles, pressure vessels and other structures, the carbon content (melting analysis) is generally not more than 0.20%, the total content of alloying elements is generally not more than 2.5%, the yield strength is not less than 295MPa, and it has good impact toughness
And low alloy steel with welding function.

What is EN 10025-6 S500QL chemical?
EN10025-6 S500QL quenched and tempered steel plate Chemical composition

Grade

C %

Si %

Mn %

P %

S %

N %

B %

Cr %

 EN 10025-6 S500QL  

 

0.200

0.800

1.700

0.020

0.010

0.015

0.005

1.500

Cu %

Mo %

Nb %

Ni %

Ti %

V %

Zr %

 

0.500

0.700

0.060

2.000

0.050

0.120

0.150

 

Depending on the product thickness and manufacturing conditions, the manufacturer can add one or several alloying elements to the steel to increase the maximum value in order to obtain the specified properties (see 7.2.2).
At least 0.015% of grain refinement elements should be present. Aluminum is one of these elements.
The minimum content of soluble aluminum is 0.015%. If the aluminum content reaches the minimum of 0.018%, the value is considered to be reached.

To be a decent company for creating values for our employees. If particular necessities, which aren’t lined in this specification, are to be met by the steel as a result of its supposed use or processing, these necessities are to be agreed before inserting the order. Cold forming means forming under the utmost allowable stress relief temperature (560 °C/1040 °F). Unless in any other case agreed, the take a look at will be performed at the lowest temperature of the corresponding high quality on transverse take a look at items. The influence take a look at will be carried out on Charpy-V-specimens in accordance with EN ISO using a 2-mmstriker. Tough Longitudinal/transverse50/35 (37/26)forty/30 (30/22)30/27 (22/20)-a The approximately converted values in brackets are for information only.

3. The chemical composition and mechanical properties of S500QL,1.8909 steel plates steel plates:
Carbon C: ≤0.20 Silicon Si: ≤0.80
Manganese Mn: ≤1.70 Nitrogen N: ≤0.015
Boron B: ≤0.0050 Chromium Cr: ≤1.50
Copper Cu: 0.50 Molybdenum Mo: 0.70
Niobium Nb: 0.06 Nickel Ni: ≤2.0
Titanium Ti: ≤0.05 Vanadium V: ≤0.12
Zirconium Zr: ≤0.15 S: ≤0.025
Phosphorus P: ≤0.015
PS: The specific chemical composition should be indicated in the steel plant material book.

There is no code for the first level: S500Q: P: ≤0.025, S: ≤0.015;
The L-level code L is expressed as S500QL: P: ≤0.020, S: ≤0.010;
The L1 code L1 is expressed as S500QL1: P: ≤0.020, S: ≤0.010;
the application of en10025-6 S500QL,1.8909
S500Q, S500QL, S500QL1 are used in construction machinery, mining machinery, coal mine machinery such as hydraulic supports, crane extension arms, crane extension arms, excavator support arms, etc. Mainly used in the manufacture of hydraulic supports with high welding performance, heavy vehicles, construction machinery, and port machinery.

  • Minimum values of impression vitality for impact exams on longitudinal V-notch check items for quenched and tempered steel.
  • However, water quenching of a fashioned work piece or component will usually be much less effective than the unique quenching within the plate mill so that the fabricator may not be able to re-establish the properties required and due to this fact sizzling forming is probably not appropriate.
  • While delicate and ductile in the resolution annealed situation, it’s capable of excessive properties with a single precipitation or growing older remedy.
  • Minimum values of impact vitality for impact checks on transverse V-notch test pieces for quenched and tempered metal, when the impression take a look at on transverse test items is agreed at the time of the order.
  • One of the most widely used precipitation hardening grades in the business.
  • Characterized by good corrosion resistance, excessive harness, toughness and strength.

If you have an interest in our products or cooperating with us, even having a comment or a suggestion please contact us now, for more detailed information. Ultra-high molecular weight polyethylene (UHMW-PE) is a new sort of engineering thermoplastics with greater than three million viscosity-common molecular weight.

Contact Us
EN10025-6 S500QL Sales department
Email: admin@gangsteel.com
Phone:

, ,

For plate thicknesses beneath 12 mm (0.5 in.) the check can be carried out on Charpy-V test specimens with decreased width; the minimum width have to be 5 mm (0.2 in). The minimal impression worth shall be decreased proportionally. Gangsteel is specialized in producing and exporting carbon steel plates, chrome steel plates and carbon metal profile stainless-steel profile Material.

San Patricio County Judge concerned TPCO Steel Plant may no longer be in operation – KIIITV.com

San Patricio County Judge concerned TPCO Steel Plant may no longer be in operation.

Posted: Wed, 09 Dec 2020 23:27:28 GMT [source]

en10025-6 S500QL 1.8909 1215 steel

High yield strength metal plate S500Q under EN owned the minimum yield energy at 500 Mpa and tensile energy within Mpa. S500QL metal is a type of high yield strength quenched and Tempered structural steel material. S500QL metal plates even have -forty degree low temperature impression take a look at. The high yield power of the base material should be taken under consideration when selecting the filler materials. It ought to be thought of that elevated warmth input leads to decrease tensile properties in the weld metallic.

Uncategorized